Xtreme Series XS327 Water Based Urethane (Gloss)

Xtreme Series XS 327 Gloss Finish
DESCRIPTION

The Xtreme Series XS327 Water Based Urethane is a strong, easy-to-use and durable sealer for countertops and most precast products, indoors or out. This sealer can be applied thinner for exterior surfaces and service in the elements or heavier for water tight applications for sinks and tubs. 

XS-327 is a penetrating, UV stable, minimal color enhancing sealer, available in both matte and gloss finishes. This is the gloss version.

At 64% solids (varies upon reduction rate) and 25 g/L VOC this high performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. XS-327 concrete countertop sealer is ideally suited for both commercial and residential settings applied upon concrete countertops, fireplace surrounds, shower panels, floor tiles, wall panels, and all Xtreme Series products. Like some other sealers, XS-327 countertop protection becomes food safe upon curing. It is stain resistant to most household chemicals and culinary items, and is heat resistant to 300°F (149°C). XS-327 is distinctive in its ability to be touched up or repaired.


HOW DO YOU APPLY?

Following these instructions, anyone can apply XS-327 sealer countertops:

1.) Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants, and fully profiled and etched.

2.) Mix 2 parts B and 3 parts A continuously for 3 minutes to ensure complete catalyzation.

3.) For prime coat, add 7 parts water to 1 part catalyzed product and mechanically mix for 2 minutes.

4.) Flood surface with xs-327 concrete countertop sealer, and work into surface using a high density foam roller until surface is saturated.

5.) Backroll the surface with a relatively dry roller using only the weight of the roller.

6.) Once prime coat is dry to the touch, surface is ready for first coat.

7.) After mixing another batch to full catalyzation, dilute catalyzed product at a rate of 2 parts water to 1 part sealer.

8.) Apply XS-327 again in similar fashion as prime coat, this time with only an even coating, again back rolling to prevent roller marks.

9.) Once first coat is dry to the touch, surface is ready for second and final coat of sealer.

10.) Mix one more batch of XS-327 cement countertop sealer, then dilute catalyzed product at a rate of 2 parts water to 1 part sealer.

11.) Apply countertop sealer in similar fashion to first coat with an even coating and again back rolling to prevent roller marks.

12.) 24 hours after second coat of XS-327 countertop sealer is applied, the surface is ready for light use, and is fully cured and food safe after 7 days.


FREQUENTLY ASKED QUESTIONS ABOUT XS-327:

IS XS-327 COUNTER TOPPING FOOD SAFE?

After full cure is achieved in 7 days, sealed surface is completely food safe.

HOW LONG DO I HAVE TO WAIT BETWEEN COATS?

Only until the sealed surface is dry to the touch and not tacky. If allowed to sit more than 12 hours, surface will need to be sanded with 220 grit sand paper to ensure proper adhesion.

DO I NEED TO USE MULTIPLE COATS XS-327?

Yes, the prime coat is essential for good penetration of the sealer and it is much easier to apply at dilution rates of 2:1 and 1:1. "Straight-up" application is never suggested.

SPECIFICATIONS AND PROPERTIES:

Coverage: Approximately 100 square foot per 40 oz catalyzed product
VOC Rating: 25 g/L (before dilution)
Solids Content: 64% (before dilution)
Shelf Life: 1 year in original unopened container
Mixing Ratio: 3 parts A to 2 parts B
Pot Life: 30 minutes
Ready for: re-coat dry to the touch
Re-coat "window": after 12 hours, sanding is required
Light Duty Use: 24 hours
Cement Counter Top Sealer: Food Safe / Cured 7 days

CHEMICAL RESISTANCE FOR XS-327 AFTER 24 HOURS

MEK: no effect
Xylene: no effect
Tap Water: no effect
Mineral Spirits: no effect
100% Ethanol: no effect
10% Acetic Acid: no effect
5% Sodium Hydroxide: no effect
50% Sodium Hydroxide: no effect
85% Lactic Acid: no effect
50% Sulfuric Acid: no effect
38% Hydrochloric Acid: no effect
10% Sodium Chloride Solution: no effect
28% Ammonia: no effect
Coffee: no effect
Cola: no effect
Grape Juice: no effect
Ketchup: no effect


TEST DATA FOR XS-327 COUNTER COATING:

Appearance (cured): Clear matte or gloss
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Appearance (wet): Milky
Odor: Sweet
Application Temperature: 60 – 90 degrees Fahrenheit
Gardener direct/reverse impact >160 inch pounds
Taber Abrasion: 40-60 mg loss
QUV – A 5.0 > @ 2,000 hours
Glosss retention >95% @ 2,000 hours

Shipping Weight: 4 lbs.

Cart Currently Empty