SureStamp (White, Summer Mix)

SureStamp Summer Mix
ADDITIONAL INFORMATION
DESCRIPTION

SureStamp is a stampable, carvable cementitious topping for beautifying interior and exterior surfaces like patios and pool decks. When stamped, it creates a texture that may resemble tile, cut stone, slate, brick, cobblestone, etc. SureStamp concrete overlay offers restoration, repair, resurfacing, architectural accenting, and surface protection of existing concrete.

SureCrete's stamp concrete overlay has the ability to create incredible three-dimensional textures, making it the perfect outlet for artistic inspiration. Designs using SureStamp stamp concrete overlay has been used to create views of themed flooring and textures in many theme parks and resorts including Walt Disney World project, Universal Studios Orlando and Busch Gardens of Tampa, Florida. With the ability to apply a wide array of pre-made rubber stamping molds and textures including faux stone, brick and even custom stamp texture patterns like stamped concrete home patios, as well as being able to manually manipulate your surfaces for custom-carved concrete make SureStamp stamp concrete overlay an incredibly versatile product for creating artistically themed concrete and stamped colors exhibits.

SureBond, a cement-based bonding agent, must be used in combination with SureStamp stamp concrete overlay to achieve the ultimate adhesion essential in a stampable overlay.

SureStamp is seasonally user-friendly, available in Summer and Winter (less retarder) mixes. This is the Summer mix. Integrally color this white mix with color packs, create highlights with color release powders, or stain.

SureStamp's stampable and carvable qualities make it useful in any arena:

Themed Concrete Patterns
Custom Sculptures
Ashlar Slate
Stamped Patterns
European Fan Stamped Textures
Faux Wood Plank Concrete Designs
Theme Parks Resorts & Hotels
Pool Decks & Patios
Custom Kitchen and Living Area Floors
Concrete Patios
Any Stamped Concrete Patterns

HOW DO YOU APPLY SURESTAMP OVERLAY BAG MIX?

SureStamp can be manipulated for a wide range of finished textures, but here's how you get started:

>> Any surface receiving a cementitious coating must be clean, cured, sound and profiled. See our Surface Preparation products for more information on accomplishing this.

>> Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 48 hour period following application.


>> Add approx. 3.5 quarts water per 50 lb bag to 5 gal bucket and mix in any color desired for integral coloring of SureStamp stamp cement overlay.


>> Slowly introduce SureStamp while continuously mixing and mix for a minimum of 1 minute once all product has been emptied into container. Scrape the sides of the bucket to make sure there are no "dry pockets" that didn't get mixed properly.


>> Mist the surface of the concrete with water ahead of any areas about to receive SureStamp stamp concrete overlay.


>> Before SureStamp can be applied, a coating of SureBond must be put down to ensure proper adhesion of the finished surface.

>> Pour a generous ribbon of SureBond onto the surface and spread with squeegee over an area that corresponds to your next workable area of SureStamp.


>> While the SureBond is still wet, pour the mixed SureStamp onto the surface.

>> Gauge-rake the product to the appropriate height for selected texture/carving pattern (usually between 1/4″ and 3/8″).

>> Smooth the surface of the SureStamp with a metal squeegee or similar tool.

>> Allow product to begin to dry, yet remain plastic. The surface will lose its wet sheen and yield to the touch with very little, if any, sticking to the finger.

>> Surface is now ready to receive a stamp pattern or custom carving. Be sure to use a releasing agent on any tools used to manipulate the surface, and to clean releasing agents off of finished surface before next step.

>> Once the surface has dried and cured sufficiently (approx 6-8 hours), it can accept stains and secondary colorants, and is also ready to receive a sealer. Typical outdoor applications would utilize an acrylic sealer.

FREQUENTLY ASKED QUESTIONS:

Do I have to use SureBond along with SureStamp stamp overlay?

Yes. Without SureBond, the SureStamp product will not adhere to your substrate correctly.

What do I do if SureStamp starts to get too sticky before I'm ready to manipulate it?

So long as it has not become hard, you can use a product like Surface Delay to allow for more work time on your surface. This will only slightly delay the process however – timing is everything with SureStamp stamp concrete overlay.

What if I want a custom stamp or carved design with SureStamp?

Custom carved patterns require only your imagination and a proper carving tool. If you want a pre-made texture stamp, contact your local distributor for more information on where to acquire stamping tools.


SPECS AND PROPERTIES:

Coverage: 15-18 square foot @ 3/8″; 20-24 square foot @ 1/4″

VOC Rating: 0 g/L

Shelf Life: 1 year in original unopened container

Mixing Ratio: 3.5 – 4 quarts water per 50 lb bag

Base Color: White

Curing Bases: Summer & Winter Mix Designs

Density: 132 lbs/cubic foot

Compressive Strength: ASTM C-109: 4,350 PSI @ 28 days

Flexural Strength: ASTM C-348: 945 PSI @ 28 days

Tensile Strength: ASTM C-190: 440 PSI @ 28 days

Abrasion Resistance: ASTM D-4060: less than 0.55% @ 28 days

T-BAR Adhesion (Durock): 190.3 PSI @ 28 days

Shear Strength: ANSI A-118.4: 280 PSI @ 28 days

Shipping Weight: 52 lbs.

Cart Currently Empty
$39.10
Add to cart