SureSpray (White, Summer Mix)
SureCrete's SureSpray is a cement-based thin sprayable concrete overlay for both interior and exterior concrete surfaces. Perhaps no other bag mix lends itself to such an enormous array of applications, variations, and alternatives, from the simplest of orange-peel to the elegant Euro-texture.
SureSpray was designed to be applied by compressed air spray equipment (commonly a hopper gun), but may also be troweled or squeegeed. Restoration, repair, resurfacing, architectural accenting, surface protection, and creating slip resistance of existing concrete are all realized through SureSpray sprayable concrete overlay. Special copolymers create adhesion and flexibility essential in a thin overlay. SureSpray is available in Summer and Winter mixes. Typical areas include pool decks, patios, walkways, and driveways.
SureSpray's sprayable concrete overlay versatility is one of its strongest qualities and allows it to be applied in a variety of fashions to create a wide array of designs and techniques. Able to be applied with a trowel, squeegee or sprayer, the possible textures are nearly limitless. Highly skilled applicators will be able to carry one product in their inventory to perform many different looks and texture designs for their customers. This will help your company to stay more "mobile" and be able to get on and off of jobsites faster without having to make those pesky runs to the local supply store.
SureSpray is a white mix, so color packs can be added to integrally color the mix. You may also color with acid stains and water-based Eco-Stains as well as seal with colored acrylic sealers. This product also comes in both a Summer Mix and Winter Mix (with less retarder). This is the Summer mix.
HOW DO YOU APPLY SURESPRAY CONCRETE OVERLAY?
SureSpray has a wide array of application methods, Here is the most common:
1. Any surface receiving a cementitious coating must be clean, cured, sound and profiled. See our Surface Preparation products for more information on accomplishing this
2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 48 hour period following application.
3. Add 4 – 6 quarts water per 50 lb bag to 5 gal bucket and mix in any color desired for integral coloring of SureSpray
4. Slowly introduce SureSpray sprayable concrete overlay while continuously mixing and mix for a minimum of 1 minute once all product has been emptied into container. Scrape the sides of the bucket to make sure there are no "dry pockets" that didn't get mixed properly.
5. Mist the surface of the concrete with water ahead of any areas about to receive SureSpray.
6. Using a hopper gun at a 1/4″ setting, apply SureSpray evenly to surface area with 100% coverage.
7. If you need a second coat of SureSpray sprayable concrete overlay, simply wait until the surface is properly cured – about 2-6 hours. Second coat can be applied same as first coat. Make sure to scrape away excess material from first coat before applying finish.
8. Once the surface has dried and cured sufficiently (about 2-6 hours), it can accept stains and secondary colorants, and is also ready to receive a sealer. Typical outdoor applications would utilize an acrylic sealer.
FREQUENTLY ASKED QUESTIONS
Do I have to use two coats?
Not necessarily. It depends completely upon the design you're looking for and the substrate you're working with.
Why are colors and cracks shadowing thrrough my overlay coating?
Depending on how SureSpray's first coating of product was applied, it may be thin enough that imperfections will likely "show through" in the first coat of the product. This would be a case where a second coat would likely be desired.
SPECS AND PROPERTIES:
Coverage: Approx 125 – 175 square foot per 50 lb bag (Varies based on substrate and application)
VOC Rating: 0 g/L
Shelf Life: 1 year in original unopened container
Mixing Ratio: 4 – 6 quarts water per 50 lb bag
Base Color: White
Density: 126.1 lbs./cubic foot
Compressive Strength: ASTM C-109: 4,278 PSI @ 28 days
Flexural Strength: ASTM C-348: 995 PSI @ 28 days
Tensile Strength: ASTM C-190: 440 PSI @ 28 days
Abrasion Resistance: ASTM D-4060: less than 0.50% @ 28 days
Mosaic Shear: ANSI A-118.4: 280 PSI @ 28 days
Shipping Weight: 52 lbs.Cart Currently Empty