SureCrete's SureFinish is an industrial floor finish providing exceptional performance and adherence to both resilient and non-resilient hard surface interior flooring. It may be applied like a conventional floor finish to terrazzo, quarry tile, brick, slate, unglazed ceramic tile, Mexican tile, and stone surfaces. Additionally, SureFinish is recommended for use on vinyl asbestos, vinyl, reinforced vinyl, asphalt, and other types of resilient floors. Its superior scuff, scratch, and detergent resistance insures maximum wear with a minimum of maintenance.

SureFinish is available in both a gloss and matte finish. This version is matte. FInd the gloss version here.

In areas where your finished floor is going to see lots of foot traffic and/or vehicular traffic, a sacrificial wax coating is often necessary to ensure the floor's design is not permanantly damaged by abrasive wear and tear. SureFinish provides an excellent protective, or surface wear barrier in both residential and commercial applications and is applied just as simply as any other wax coating, but without the hassle of having to buff anything out.

HOW TO APPLY:

SureFinish is one of SureCrete's easiest-to-use products:

1.) SureFinish is typically applied with a mop and bucket.

2.) Fully saturate the mop head and wring out so that mop is damp, but not dripping.

3.) Apply thin to medium coats until desired initial gloss is achieved (usually 2-3 coats).

4.) For best results, burnish between coats using a white or non-agressive floor pad.

5.) Between coats allow the floor to dry to the touch and wait an additional 15 minutes

FREQUENTLY ASKED QUESTIONS:

HOW MANY COATS OF SUREFINISH DO I HAVE TO APPLY?

It's entirely up to you and your preference for protection and sheen.

DO I HAVE TO BUFF OR BURNISH SUREFINISH?

Technically no, but for best results, we recommend doing so – especially in cases where you're looking to create a very smooth glossy finished floor coating.

CAN SUREFINISH STAND ALONE AS A FLOOR SEALER?

It is really not recommended. If you're looking for a one-coat system, we would suggest the use of either Epoxy 100 or PFC-180.

SPECS AND PROPERTIES OF SUREFINISH:

Coverage: 1,500 – 3,000 square foot per gallon per coat (varies widely depending substrate and application method)
VOC Rating: 0 g/L
Shelf Life: 1 year in original unopened container
Slip Resistance: Meets ASTM 2047 standard for slip resistance in floor coatings. The addition of SureFinish to nearly any surface will increase slip resistance.

Shipping Weight: 50 lbs.

Cart Currently Empty