SureCrete SCR (Super Concrete Renovator) (1 gallon)
Super Concrete Renovator (SCR) is an eco-friendly 3-in-1 concrete cleaner. SCR brings a powerful concentrated concrete cleaner, degreaser, and etcher which is a safe alternative to muriatic acid. SCR works by the solution going into the pores of the concrete and bubbling the impurities out to be rinsed away. Application in this situation is 1-1 or 2-1 (water to SCR).
Even though SCR is a powerful concrete cleaner, it has been designed not to hurt the landscaping. SCR can aid in removing dirt, efflorescence, mold, mineral deposits, and rust, and works well to lighten and remove oil and gasoline stains. Cleaning your concrete driveways, sidewalks, patios, porches, pool decks, sand pavers and landscape edging has never been easier and more cost effective then using SCR to bring your concrete back to life.
In addition to its uses on natural surfaces, SCR is the premier chemical surface preparation solution for decorative cement products. The combination of a etcher and cleaner makes it an ideal application prior to applying concrete overlays, stains, and acrylic sealers. The etching process will open up the pores allowing for an increase in adhesion and absorption of cement overlays and acrylic sealers and paints. SCR is excellent on thin overlays (such as SureSpray, SureTex, SureBroom, and Micro Topping) and stamp overlays prior to the application of reactive acid stains, water based stains, dyes, and Eco-Stain. This application with SCR ranges from 3-1 to 4-1 (part water to part SCR).
Super Concrete Renovator also works for cleaning and preparing countertops for sealers and coatings and also cleaner pavers. Although SCR can work on natural stone, is was designed to aid casted countertops and Glass Fiber Reinforced Concrete (GFRC) or paver clean. In each of these applications the surface is dense and tight allowing for minimal penetration and absorption. SCR in a dilution of 2-1 to 4-1 (part water to part SCR) will help open the pores of the surface increase the penetration and adhesion of countertop sealers, such as XS-327 and XS-PC12. SCR can also remove release agents that the surface absorbed during the curing process, ensuring that the secondary coloring system such as reactive acid stains, water based stains, dyes, and Eco-Stain can be absorbed and create the natural modeling desired.
This is 1 gallon. SCR is also available in a 5 gallon container.
HOW DO YOU APPLY SURECRETE SCR?
One of the easiest cleaning and profiling agents available, SCR was formulated to be a product anyone can use.
1) Depending on the surface you intend to clean, dilute SCR to as much as 4 parts water to 1 part SCR.
2) Dampen concrete surface prior to application of concrete remover cleaner.
3) Apply evenly across surface with a pump-up sprayer, being careful to maintain a wet surface.
4) While surface is still wet, work SCR into the surface using a nylon bristle broom.
5) Before SCR cleaner can dry, rinse surface with hose or power washer and make sure all residue has been removed.
FREQUENTLY ASKED QUESTIONS:
I USED SCR AND MY COATING PEELED OFF! WHAT HAPPENED?
One of two things – either SCR was not applied strongly enough and your coating was unable to form a good bond with the substrate, or the SCR was left on the surface too long and formed a residue preventing a clean surface to bond
to. Make sure your surface is clean before you start your new coating!
DO I HAVE TO NEUTRALIZE SCR?
No, it just needs to be rinsed cleanly from the surface! No neutralization required!
SPECS AND PROPERTIES:
Coverage: Varies on substrate, approx. 150 square foot /gallon
VOC Rating: 0 g/L
Shelf Life: 1 year in original unopened container
Appearance: Cleaner Green liquid
Shipping Weight: 10 lbs.
Please select an option below by clicking image